Default Setting 4g Systems XSBox Go+ Router Login Username Password IP Address Modem Wi-Fi Network
Find the default IP address and the password for the user interface of the 4g Systems XSBox Go+ Mobile Broadband router. This site also provides information about the preconfigured Wi-Fi settings of the device. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.123.254
- Username:
- <blank>
- Password:
- admin
Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings
- SSID:
- starts with XSBoxGoplus_
- Password:
- <blank>
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the 4g Systems XSBox Go+, you have to do the following steps for access:
- Put router into operation
- Set up a connection between the device and the router via Wi-Fi*
- Open web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter password in the open user interface and confirm again
Reset default settings
Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the 4g Systems XSBox Go+ to its default settings, you have to do the following steps:
- Switch on router
- For at least 3 seconds, press the Reset button
- Restart of the device is automatically executed
- Router has been reset to factory settings
Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.