7links PX-4884-919 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Find the default IP address and the password for the user interface of the 7links PX-4884-919 3G/UMTS WLAN WRP-410.mini router. This site also provides information about the preconfigured Wi-Fi settings of the device. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.169.1
- Username:
- <blank>
- Password:
- admin
Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings
- SSID:
- starts with 7Links_PX-
- Password:
- <blank>
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the 7links PX-4884-919, you have to do the following steps for access:
- Switch on router
- Connect the device via Wi-Fi* or a network cable with the router
- Open browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter password in the login form and confirm
Reset default settings
Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the 7links PX-4884-919 to its default settings, you have to do the following steps:
- Switch on router
- Press R button and hold for at least 10 seconds
- Device is automatically restarted
- Default settings have been restored
Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.