Router Default Setting

AboCom WR5502 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

abocom Default router settings, abocom default WiFi settings, abocom default gateway, abocom default IP address

Here you will find the default IP address and the username and password for the user interface of the AboCom WR5502 Wireless Broadband router. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.1.254
Username:
admin
Password:
admin

Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings

No wireless networks are preconfigured for this device.

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the AboCom WR5502, you have to do the following steps for access:

  1. Turn on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open browser
  4. Insert IP address into the address bar and confirm with ‘Enter’ key
  5. Enter username and password in the open user interface and confirm again
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the AboCom WR5502 to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press Reset button and hold for at least 5 seconds
  3. Device is automatically restarted
  4. Default settings have been restored

Execute software reset

With the AboCom WR5502, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.