Router Default Setting

Default Setting ALLNET ALL02400N Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

allnet Default router settings, allnet default WiFi settings, allnet default gateway, allnet default IP address

Here you will find the default IP address and the username and password for the user interface of the ALLNET ALL02400N WiFi ADSL2+ router. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.1.1
Username:
admin
Password:
admin

Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings

No wireless networks are preconfigured for this device.

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the ALLNET ALL02400N, you have to do the following steps for access:

  1. Switch on router
  2. Set up a connection between the device and the router via Wi-Fi* or network cable
  3. Open browser
  4. Insert IP address in the address bar and confirm with ‘Enter’ button
  5. Enter username as well as password in the login form and confirm
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the ALLNET ALL02400N to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press Reset button for at least 10 seconds
  3. Device is automatically restarted
  4. Router has been reset to factory settings

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.