Router Default Setting

Default Setting ASUS DSL-N12E Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

asus Default router settings, asus default WiFi settings, asus default gateway, asus default IP address

Here you will find the default IP address and the username and password for the user interface of the ASUS DSL-N12E Wireless-N300 ADSL Modem router. This site also provides information about the preconfigured Wi-Fi settings of the device. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.1.1
Username:
admin
Password:
admin

Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings

SSID:
ASUS
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the ASUS DSL-N12E, you have to do the following steps for access:

  1. Turn on router
  2. Connect the device via Wi-Fi* or a network cable with the router
  3. Start web browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username as well as password in the login form and confirm
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the ASUS DSL-N12E to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press Reset button for at least 6 seconds
  3. Device restarts automatically
  4. Router has been reset to factory settings

Execute software reset

With the ASUS DSL-N12E, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.