Belkin F7D3301 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Here you will find the default IP address and the predefined access data for the user interface of the F7D3301 Share Max Wireless router of Belkin. This site also provides information about the preconfigured Wi-Fi settings of the device. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.2.1 (or http://router)
- Username:
- <blank>
- Password:
- <blank>
Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings
- SSID:
- on an information card that comes with the router
- Password:
- on an information card that comes with the router
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the Belkin F7D3301, you have to do the following steps for access:
- Put router into operation
- Set up a connection between the device and the router via Wi-Fi* or network cable
- Start web browser
- Insert IP address or URL into the address bar and confirm with ‘Enter’ button
- Enter password in the open interface and confirm once more
This router can also be configured with the provided software.
* Make sure that your router’s Wi-Fi is activated.Reset default settings
Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the Belkin F7D3301 to its default settings, you have to do the following steps:
- Put router into operation
- For at least 10 seconds, press the Reset button
- Device is automatically restarted
- Router has been reset to factory settings
Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.