Router Default Setting

Billion BiPAC 7300N RE Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Default router settings, default WiFi settings, default gateway, default IP address

Here you will find the default IP address and the username and password for the user interface of the Billion BiPAC 7300N RE WLAN 300 Mbps ADSL2+ router. This site also provides information about the preconfigured Wi-Fi settings of the device. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.1.254
Username:
admin
Password:
admin

Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings

SSID:
wlan-ap
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Billion BiPAC 7300N RE, you have to do the following steps for access:

  1. Turn on router
  2. Establish a connection between the device and the router via network cable or Wi-Fi*
  3. Open web browser
  4. Enter IP address in the address bar and then confirm with ‘Enter’ key
  5. Enter username and password in the open interface and confirm once more
* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Billion BiPAC 7300N RE to its default settings, you have to do the following steps:

  1. Put router into operation
  2. Press Reset button and hold for at least 6 seconds
  3. Restart of the device is automatically executed
  4. Restoration of standard settings is finished

Execute software reset

With the Billion BiPAC 7300N RE, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.