Router Default Setting

Intellinet Network Solutions 523608 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Default router settings, default WiFi settings, default gateway, default IP address

Here you will find the default IP address and the predefined access data for the user interface of the 523608 High Speed Broadband router of Intellinet Network Solutions. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.10.1
Username:
<blank>
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Intellinet Network Solutions 523608, you have to do the following steps for access:

  1. Put router into operation
  2. Connect the device via network cable with the router
  3. Open web browser
  4. Insert IP address into the address bar and confirm with ‘Enter’ key
  5. Enter password in the open interface and confirm once more

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Intellinet Network Solutions 523608 to its default settings, you have to do the following steps:

  1. Switch on router
  2. Press RESET button and hold for at least 5 seconds
  3. Restart of the device is automatically executed
  4. Default settings have been restored

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.