Linksys BEFSRU31 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Here you will find the default IP address and the username and password for the user interface of the Linksys BEFSRU31 EtherFast® Cable/DSL router. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:: 192.168.1.1
Username:: admin
Password:: admin

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Linksys BEFSRU31, you have to do the following steps for access:

Turn on router
Set up a connection between the device and the router via network cable
Open web browser
Insert IP address into the address bar and confirm with ‘Enter’ key
Enter username and password in the open interface and confirm once more

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Linksys BEFSRU31 to its default settings, you have to do the following steps:

Turn on router
Press and hold the Reset button until the router’s Diag LED flashes
Device is automatically restarted
Default settings have been restored

Execute software reset

With the Linksys BEFSRU31, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.