Router Default Setting

Linksys EA2750 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Default router settings, default WiFi settings, default gateway, default IP address

Find the default IP address and the password for the user interface of the Linksys EA2750 N600 Dual-Band Smart Wi-Fi router. This site also provides information about the preconfigured Wi-Fi settings of the device. In the bottom part of this site, you will find a manual for accessing the router’s user interface.

Login data for the user interface

IP address:
192.168.1.1
Username:
<blank>
Password:
admin

Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings

SSID:
on a sticker on the router’s case
Password:
on a sticker on the router’s case

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Linksys EA2750, you have to do the following steps for access:

  1. Switch on router
  2. Connect the device via Wi-Fi* or a network cable with the router
  3. Open browser
  4. Insert IP address into the address bar and confirm with ‘Enter’ key
  5. Enter password in the login form and confirm
* Make sure that your router’s Wi-Fi is activated.