Router Default Setting

Netgear LB1111 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Default router settings, default WiFi settings, default gateway, default IP address

Find the default IP address and the password for the user interface of the Netgear LB1111 4G LTE Modem router. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.5.1
Username:
<blank>
Password:
password

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the Netgear LB1111, you have to do the following steps for access:

  1. Put router into operation
  2. Establish a connection between the device and the router via network cable
  3. Open browser
  4. Insert IP address into the address bar and confirm with ‘Enter’ key
  5. Enter password in the login form and confirm

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the Netgear LB1111 to its default settings, you have to do the following steps:

  1. Turn on router
  2. For at least 5 seconds, press the Reset button
  3. Restart of the device is automatically executed
  4. Default settings have been restored

Execute software reset

With the Netgear LB1111, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.