Sitecome WLM-3600 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Here you will find the default IP address and the predefined access data for the user interface of the WLM-3600 Wi-Fi X3 N300 Modem router of Sitecome. This site also provides information about the preconfigured Wi-Fi settings of the device. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.0.1 (or http://sitecom.modem)
- Username:
- admin
- Password:
- on a sticker on the router’s case
Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings
- SSID:
- on a sticker on the router’s case
- Password:
- on a sticker on the router’s case
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the Sitecome WLM-3600, you have to do the following steps for access:
- Turn on router
- Connect the device via Wi-Fi* or a network cable with the router
- Start web browser
- Insert URL or IP address into the address bar and confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more
Reset default settings
Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the Sitecome WLM-3600 to its default settings, you have to do the following steps:
- Turn on router
- Press OPS button for at least 15 seconds
- Device restarts automatically
- Router has been reset to factory settings
Execute software reset
With the Sitecome WLM-3600, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.