SMC Networks SMC8014WG-SI Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Here you will find the default IP address and the username and password for the user interface of the SMC Networks SMC8014WG-SI WiFi Cable Modem router. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.0.1
- Username:
- cusadmin
- Password:
- password
Preconfigured [Preset, Preinstalled, Built-in] Wi-Fi settings
No wireless networks are preconfigured for this device.
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the SMC Networks SMC8014WG-SI, you have to do the following steps for access:
- Switch on router
- Establish a connection between the device and the router via network cable or Wi-Fi*
- Start web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username and password in the open user interface and confirm again
Reset default settings
Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the SMC Networks SMC8014WG-SI to its default settings, you have to do the following steps:
- Switch on router
- For at least 10 seconds, press the Reset button
- Device restarts automatically
- Restoration of standard settings is finished
Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.