Tenda G3 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Here you will find the default IP address and the username and password for the user interface of the Tenda G3 QoS VPN router. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
- IP address:
- 192.168.0.252
- Username:
- admin
- Password:
- admin
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the Tenda G3, you have to do the following steps for access:
- Switch on router
- Establish a connection between the device and the router via network cable
- Open web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username as well as password in the login form and confirm
Reset default settings
Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the Tenda G3 to its default settings, you have to do the following steps:
- Switch on router
- Press RESET button and hold for at least 8 seconds
- Device restarts automatically
- Router has been reset to factory settings
Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.