Router Default Setting

TP-LINK Archer C59 Router Login Username Password IP Address Modem Wi-Fi Broadband Default Setting

Default router settings, default WiFi settings, default gateway, default IP address

Here you will find the default IP address and the predefined access data for the user interface of the Archer C59 AC1350 Wireless Dual Band router of TP-LINK. Below you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

IP address:
192.168.0.1 (or http://tplinkwifi.net)
Username:
<blank>
Password:
<blank>

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the TP-LINK Archer C59, you have to do the following steps for access:

  1. Turn on router
  2. Connect the device and router
  3. Start web browser
  4. Insert IP address or URL into the address bar and confirm with ‘Enter’ button
  5. Enter password in the open user interface and confirm again

Reset default settings

Resetting to default settings is particularly useful if you've changed and forgotten the login credentials for the user interface. Please note that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the TP-LINK Archer C59 to its default settings, you have to do the following steps:

  1. Turn on router
  2. Press Reset button and hold for at least 5 seconds
  3. Device is automatically restarted
  4. Restoration of standard settings is finished

Execute software reset

With the TP-LINK Archer C59, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

Once you have successfully completed the steps above, the router's configuration will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.